0
komentar
Diposting oleh
hajkur
Label:
22,
a,
association,
boat,
conception,
crazy,
fitspatrick,
i,
idea,
megan,
modern,
of,
part,
ply,
podcast,
the,
wooden,
woodworkers,
Woodworking Projects
Here you can view the handle as its shaped to design paper template. Some rounding to the handle as well as the inside of the finger hole has also been completed. I prefer to drill and fit the saw screws very early into the work. 
The 12" x 3" saw plate shaped and fitted within the handle. 
To help me mark the harback mortise within the handle I prefer to use a spare length of hardback which is fitted to the toothline. The use of upper and lower hardbacks locks the external saw plate in the same parrallel alignment to that within the handle. A good method to use if you want to keep the saw plate nice and straight along the toothline. 
To clean out the hardback mortise on the handle I like to use a variety of hand tools that also include planemaker floats. 
In this photo you can see that the brassback has been cut to length, rounded off at the toe, and secured to the handle. The bottom line of the saw plate is also nice and straight. 
The shaping of the handle is also nearly completed. 
Hear you can see the final stages of sharpening the saw teeth. I chose to go for a 12 tpi. rip tooth for this backsaw. The saw vise clamping length was modified from its original 9 " to a new 23.5 " 
The final look of the backsaw. The Tas.Tiger Myrtle chosen for the handle came up a treat. I only use 0000 steel wool between each coat of wood sealer and shellac. Another unique saw to add to my collection. Regards; Stewie
He expresses with great skill most of all his outstanding artistic vein in the art of carving. 
This time we have "forced" him to teach us some good rule to acquire the best practice in this work and, under his leadership, we have tried to do some exercise. The quality of carving tools and their sharpness are fundamental prerequisites for best results.
In this regard, it is very useful to have a sharpening stone on the bench for honing more frequently the cutting edge of most commonly used tools. In the picture it shows a concave shaped oil stone that best fits the profile of some edges. Unfortunately the time available is never enough, but we memorized some good advice on strategies of work, the importance of a good initial design and the respect of plans on which the various details are located, in order to obtain a perspective effect.
The slitting blade I was using was hss 75mm o.d. x 0.5mm thickness. The o.d. gave me an effective cut of 45mm outside the top flange of the slitting blade holder. The 0.5mm was slightly under gauge to the 0.020 inches saw plate I normally use for my backsaws. As it ended up this was ideal as I was able to slide the saw plate within the kerfed cut without having to open it up any further. I chose to use an old discarded backsaw handle for the trial and cut 2 slots well achoice from the original slot that was cut in the handle, flipping the handle over as I went. Heres the end results. 
On each side of the handle I completed 3 passes to achieve an optimum outside penetration of the area I wanted slotted. It felt quite safe to run the handle through the slitting blade while guided the handle by hand. But I would not recommend likewise to others unless you have a high quality mounting for the router, a failsafe depth adjustment lock, and a means of slowing down the operating speed of the router. Continuing on: 
The 2nd pass in the correct feed direction. 
The 3rd and final pass in an opposing feed direction. I could not feel any obvious signs of heat build up on the slitting blade after completing all 3 passes.
The final step was to insure the slot was cut to the full and proper depth to allow the saw plate correct seating within the handle. This was done by hand using a dedicated high tpi backsaw thats had the set removed. As mentioned the results were excellent with the handle slots spot on to the horizontal plane of each of the handle faces.
