The Greenwich Frame Part IV Completion Presentation

Because I was responsible for the entire completed frame, finishing the construction & finishing still meant I had glass, matting & hanging hardware to obtain and install.

The finished frame, ready to be accessorized.

I began with the matting and went to our local Michaels on December 15th. They told me that having them custom cut the matting (as I have alchoices done) would take ten days. Since I had to give the frame as a gift on Christmas Eve I found myself instead buying a piece of matting off the shelf in a similar color. The layout was rather straightforward (I had already figured it out, thinking I was supplying it to Michaels). Trimming the outside of the matting also proved easy, using my 8" shears (every shop should have a giant pair of scissors). What I was really afraid of was cutting out the center of the matting, as I had never before attempted it. Thankfully, it proved easy. I cut the matting using a straight edge clamped over it and a sharp X-acto knife. I started from the corners and worked in, wanting to ensure that I didnt over-cut any of the edges. After a few gentle passes, each side was cut. Three quick reallignments and the matting was cut. I kept the knife plumb in order to make a cut perpendicular to the face of the matting. While I prefer matting that has been cut at a bevel to reveal a narrow white band around the picture, I didnt think I could keep the inside corners clean or the bevel consistent with an X-acto knife. The simple square cut kept it neat.

Apparently, I can cut matting.

For the glass, I did what I alchoices do when I make a frame; I went down to the local hardware store and ordered a piece of 1/8" plate glass, cut to fit.Assembly consisted of washing & installing the plate glass followed by the matting (with the picture taped to the back) and then a simple piece of peg board. I used window glazing points to hold the whole assembly in. I then attached a wire to hang the frame with  using #6 x 3/4" pan head screws.

The back of the completed frame.

The last thing I did was install 4 clear plastic self-adhesive feet to the frame. Ive never done that to a frame before, but I dont like it when the top edge of the frame sticks off the wall due to the hanging hardware. I figured that the clear feet would hold the frame evenly off the wall.

The completed, assembled frame.

Hopefully the feet idea will work, and the whole frame will look good in its new home. I gave the frame to my Dad for Christmas and its now hanging at its new home in Greenwich. I havent been up to see it yet, but Ill certainly let everyone know what it looks like in place.The whole Greenwich Frame Saga:The Greenwich Frame, Part I: DesignThe Greenwich Frame, Part II: Fabrication BeginsThe Greenwich Frame, Part III: Plugging Achoice

Related Posts by Categories

be

• Let There Be Light Part III
• MWA Podcast 33 Paul Limiski
• Wont Your Fireplace Be Jealous
• Build a Case for your Books with your Friends
• Goodbye Village Carpenter You Will Be Missed
• MWA Review 1 Rough Cut Woodworking with Tommy Mac
• Let There Be Light Part II
• Help The MWA Be Heard
• On Milling
• The Chair Is A Political Item
• Shop Tour M Scott Morton Part II
• Safety Week Be Careful About Your Router
• Jointing Fence
• What Cool Kids Will Be Asking At Woodworking in America
• Let There Be Light Part I

frame

• MWA Banner Rack Beginnings
• The Electrical Panel Frame Door
• A House In The Trees Part VIII
• How To Design Furniture
• My Windows Are Extended Are Yours
• Dylans Frame
• First WorkBench
• BenchMark Table Review
• Frame and Panels a way for building furnitures
• The Greenwich Frame Part I Design
• The Greenwich Frame Part II Fabrication Begins
• Squaring up a board
• The Greenwich Frame Part III Plugging Away
• Shop Renovation Phase 1 Video 2
• Old way for frame and panel construction

completion

• MWA Banner Rack Beginnings